Post by Butch Hazzard on Dec 12, 2010 9:29:05 GMT -5
P1. All karts will be clearly identified with numbers in five (4) places.
1. Front of kart.
2. Right side of kart.
3. Left side of kart.
4. Rear of kart. (white plate & black number)
5. Right side of helmet, (OPTIONAL).
Numbers in positions a,b,c, & d will be a minimum of five (5) inches in height and of a CONTRASTING color from the kart body. Number must be a solid color. If your number is not legible to the scorers in the tower, you will be required to place a black number on a white panel measuring a minimum of six (6) by eight (8) inches securely attached to the kart. Failure to comply will result in the kart being prohibited from competing in the event. There will be no duplicate numbers in any one class. In the event that there are duplicate numbers in one class, preference will be given to the competitor finishing the highest in that class during the previous year.
P2. Any new racing competitor will start at the rear of all heat races and features for three (3) weeks. The track will reserve the right to start any competitor in the rear of a race if it is felt to be in the best interest of safety.
P3. All karts are required to have a plastic tie installed on the spark plug wire measuring a minimum of six (6) inches in length. All karts entering the pits from the racetrack will be required to remove the spark plug wire from the spark plug even if they have an engine kill switch.
P4. Any competitor unable to compete in the first heat will start last in the second heat.
P5. If your kart becomes disabled, raise your hand and pull to either the infield or the pits.
P6. All areas of the track must be completely clear before racing will resume. No pit crew members (family or friends) are to accumulate at the pit entrance or pit exit areas.
1. Front of kart.
2. Right side of kart.
3. Left side of kart.
4. Rear of kart. (white plate & black number)
5. Right side of helmet, (OPTIONAL).
Numbers in positions a,b,c, & d will be a minimum of five (5) inches in height and of a CONTRASTING color from the kart body. Number must be a solid color. If your number is not legible to the scorers in the tower, you will be required to place a black number on a white panel measuring a minimum of six (6) by eight (8) inches securely attached to the kart. Failure to comply will result in the kart being prohibited from competing in the event. There will be no duplicate numbers in any one class. In the event that there are duplicate numbers in one class, preference will be given to the competitor finishing the highest in that class during the previous year.
P2. Any new racing competitor will start at the rear of all heat races and features for three (3) weeks. The track will reserve the right to start any competitor in the rear of a race if it is felt to be in the best interest of safety.
P3. All karts are required to have a plastic tie installed on the spark plug wire measuring a minimum of six (6) inches in length. All karts entering the pits from the racetrack will be required to remove the spark plug wire from the spark plug even if they have an engine kill switch.
P4. Any competitor unable to compete in the first heat will start last in the second heat.
P5. If your kart becomes disabled, raise your hand and pull to either the infield or the pits.
P6. All areas of the track must be completely clear before racing will resume. No pit crew members (family or friends) are to accumulate at the pit entrance or pit exit areas.