|
Post by Butch Hazzard on Dec 12, 2010 9:35:17 GMT -5
1. All nuts and bolts on the steering and brake components must be safety wired or keyed with cotter pins.
2. All weights must be securely attached with at least 5/16" bolts and 2 nuts. These must be safety wired or pinned with cotter pins as well.
3. Gas class thru Junior 1 require full rear bumpers.
4. NO aluminum bodies. All bodies must be made of plastic or fiberglass. If the kart has a full nosepiece, there will be no bumpers protruding in front of the nose.
5. No protruding bars will be allowed.
6. All bumpers and nerf bars will be securely bolted or pinned to the frame.
7. All karts will have brakes, which must function properly. NO scrub type brakes will be allowed.
8. With the driver seated in the kart, the steering wheel must not extend above the line of sight of the driver.
9. All mufflers and exhaust pipes must remain inside of the rear bumper. The bolts holding the exhaust pipe to the motor MUST BE SAFETY WIRED. A RLV 91 muffler is mandatory in all classes.
10. A BLACK flag will be displayed to any kart which is deemed to be a risk to the other drivers.
11. Cage Karts and Slingshots will have mandatory fire suits, arm restraints, and five point harness. Fire suit must be rated SFI 3.2 A / 1 or better.
|
|